Curt Tri-Ball Mount Review - 2012 GMC Sierra- Video
Today on our 2012 GMC Sierra we'll be test fitting the curt-tri-ball-mount for two inch hitches. Part number C45001. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip. Now, since this ball mount has no drop or rise, if your vehicle's hitch height matches your trailer's ride height, no this would be an appropriate ball mount for you. With the ball mount In this position, the 2 and 5/16th inch ball is on the top. We can flip it to the left to match the 1 and 7/8ths inch ball or to the right to access the 2 inch ball. more
12/13/2013 11:31:58 AM
MaxxTow Ball Mount Review - 2011 GMC Sierra- Video
Today on our 2011 GMC Sierra well be test fitting the Maxxtow ball mount with 2-inch accessory receiver for 2-inch hitches with a 2 -inch drop rated at 5,000 pounds, part number mt70066. Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle is 17 inches. Keep in mind this measurement may vary due to hitch style, tire size, or aftermarket accessories. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with a pin and clip. more
7/31/2013 7:54:38 AM
Curt Tri-Ball Mount Review - 2011 GMC Sierra- Video
7/31/2013 7:47:37 AM
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2011 GMC Sierra- Video
Today on our 2011 GMC Sierra, we'll be test fitting the Convert-A-Ball cushioned 6-way multi-hitch ball mount for 2" hitches, rated at 10,000 lbs., part number CAB-6W. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch, and securing it with a pin and clip. Now since this ball mount has no drop or rise, if your trailer's ride height matches your vehicle's hitch height, the ball mount would be appropriate for you. We can rotate the ball mount to access the three different-size balls, a 2-5/16" ball, a 2" ball, and a 1-7/8" ball. Also, this ball mount can work with a clevis, lunette ring, or spade. And with that, that will complete today's test fit for the Convert-A-Ball cushioned 6-way multi-hitch ball for 2" hitches, part number CAB-6W, on our 2011 GMC Sierra.. more
7/31/2013 7:46:16 AM
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2011 GMC Sierra- Video
Today on our 2011 GMC Sierra well be test fitting the Convert-a-ball dual cushioned adjustable ball mount with a 7-inch rise or 9-inch drop rated at 5,000 pounds, part number cab-um. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch. Well line up the pin holes and secure it with a pin and clip. Now with the ball mount in the drop in its lowest position, we can measure from the ground to the top of the ball platform. Well get a measurement of about 13 inches. We can then pull the pin to raise the ball mount platform to its highest position while also in the drop. more
7/30/2013 9:28:53 AM
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2011 GMC Sierra- Video
Today, on our 2011 GMC Sierra, well be test fitting the Convert-A-Ball Cushion Ball Mount for two inch hitches with a 6-3/4 inch rise or eight inch drop, rated at 10,000 pounds, part number AMSC8. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17 inches. Keep in mind this measurement may vary to the hitch style, tire size or aftermarket accessories. Well now begin our test fit in a drop position by sliding the shank of the ball mount into the opening of the hitch. more
7/30/2013 9:27:08 AM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2011 GMC Sierra- Video
Today, on our 2011 GMC Sierra, well be test fitting the Convert-A-Ball Cushion Ball Mount for two inch hitches with a one inch rise or two inch drop, rated at 14,000 pounds, part number AMSC2HD. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17-1/2 inches. Keep in mind this measurement may vary to the hitch style, tire size or aftermarket accessories. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch in a drop position. more
7/30/2013 9:26:45 AM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2011 GMC Sierra- Video
Today on our 2011 GMC Sierra well be test fitting the Convert-a-ball cushioned ball mount for 2-inch hitches with a 3/4-inch rise or a 2-inch drop rated at 10,000 pounds, part number amsc2. Before we begin our test fit we will first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle is 17 inches. Keep in mind this measurement may vary due to hitch style, tire size, or aftermarket accessories. Well now begin our test fit by sliding the shank of the ball mount into the opening of the hitch. more
7/30/2013 9:21:25 AM
MaxxTow Adjustable-Height Ball Mount Review - 2011 GMC Sierra- Video
Today, on our 2011 GMC Sierra, well be test fitting the MaxxTow Adjustable Height Ball Mount for two inch hitches with a 10 inch drop or eight inch rise, rated at 5,000 pounds, part number MT70067. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17-1/2 inches. Keep in mind this measurement may vary to the hitch style, tire size or aftermarket accessories. Well now begin our test fit in a drop position by sliding the shank of the ball mount into the opening of the hitch and securing it with a pin and clip. more
7/30/2013 7:46:30 AM
Draw-Tite Ball Mount Review - 2011 GMC Sierra- Video
Today, on our 2011 GMC Sierra, well be test fitting the Draw-Tite Ball Mount with a inch rise or two inch drop, rated at 7,500 pounds, part number 2923. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17 inches. Keep in mind this measurement may vary to the hitch style, tire size or after market accessories. Well begin our test fit by sliding the shank of the ball mount in a draw position into the opening of the hitch and securing it with the pin and clip. more
7/29/2013 3:52:36 PM
Diversi-Tech Adjustable Ball Mount Review - 2011 GMC Sierra- Video
Today, on our 2011 GMC Sierra, well be test fitting the Diversi-Tech Self Locking Adjustable Aluminum Ball Mounted Two Chrome Balls with the six inch drop or seven inch rise, rated at 10,000 pounds, part number DTALBM6600. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle is 17 inches. Keep in mind this measurement may vary to the hitch style, tire size or after market accessories. Well begin our test fit in a draw position by sliding the shank of the ball mount into the opening of the hitch. more
7/29/2013 3:51:02 PM
Convert-A-Ball Cushioned Pintle Hook Combo Review - 2011 GMC Sierra- Video
Today, on our 2011 GMC Sierra, well be test fitting the Convert-A-Ball Cushion Pintle Hook Combo with three nickel plated balls, rated at 16,000 pounds, part number PH2. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with the pin and clip. Now, to access the pintle, or to be able to use one of the three nickel plated balls, we can pull the gold safety pin at the base, and then pull out the silver circle and lift up on the handle. This will allow us to remove the sleeve exposing the pintle, or to be able to install the three nickel plated balls. Now, since this ball mount has no drop or rise, if your trailers ride height matches our vehicles hitch height, this will be an appropriate ball mount for you. That our complete of todays test fit for the Convert-A-Ball Cushion Pintle Hook Combo with three nickel plated balls, part number PH2, on our 2011 GMC Sierra. more
7/29/2013 3:42:45 PM
Andersen Rapid Hitch Ball Mount Review - 2011 GMC Sierra- Video
Today, on our 2011 GMC Sierra, well be test fitting the Rapid Hitch Adjustable Aluminum Ball Mount Kit with two chrome balls, with the 5 inch drop, part number AM3410. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17 inches. Keep in mind this measurement may vary due to the hitch style, tire size, or aftermarket accessories. Well now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch, we can then secure it with the pin and clip. more
7/29/2013 3:41:14 PM
Andersen Rapid Hitch Ball Mount Review - 2005 GMC Sierra- Video
Today, on our 2005 GMC Sierra, we'll be test-fitting our Rapid Hitch adjustable aluminum ball mount kit with two chrome balls, part number am3410. Now, to begin our test-fit, we'll need to go ahead and get out hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now, on this truck, that measurement is 20-and-a-half inches. Now, keep in mind that the measurement can change die to tire size, hitch style, or any other accessory which may change your vehicle's ride height, so it's a good idea to measure yours.We'll now go ahead and slide the shank of the ball mount into the hitch, lining up the hitch pin hole, and installing our pin and clip. That will secure the ball mount to our Sierra. more
4/19/2013 3:16:17 PM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2005 GMC Sierra- Video
Today on our 2005 GMC Sierra, we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2 inch hitches with one inch rise or two inch drop rated at 14,000 pounds, part number AMSC2HD.Now to begin our test fit, we'll need to get our hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now on this truck, that measurement is 20 and a half inches. Now keep in mind, that the measurement can change due to tire size, hitch style, or any other accessory which may change your vehicles right height so its a good idea to measure yours.We'll now slide the ball mount shank into our hitch, line up our hitch pinholes and install our hitch pin and clip.With that, our ball mount is secured to our GMC in the drop position. Now we'll go ahead and measure from the top of the ball mount platform to the ground with this ball mount. That measurement is 18 and a half inches. more
4/5/2013 11:00:27 AM
Draw-Tite Ball Mount Review - 2005 GMC Sierra- Video
Today on our 2005 GMC Sierra, we'll be test fitting the draw tite ball mount with 3 quarter inch rise or 2 inch drop rated at 6,000 pounds, part number 2923. Now to begin our test fit, we'll need to get our hitch hide measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now in this truck, that measurement is 20 and 1/2 inches. Now keep in mind that the measurement can change due to tire size, hitch style or any other accessory which may change your vehicles ride height. So it's a good idea to measure yours. When outside the ball mount into the hitch, line up the hitch pin hole and using our pin and clip, we'll secure our ball mount to our GMC. more
4/3/2013 2:54:03 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2005 GMC Sierra- Video
Today on our 2005 GMC Sierra we'll be test fitting part number AMSC2, the convert-a-ball cushion ball mount for 2 inch hitches, with 3/4 inch rise or 2 inch drop, rated at 10,000 pounds. Now to begin our test fit, we'll need to get our hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now on this truck, that measurement is 20.5 inches. Now keep in mind that the measurement can change due to tire size, hitch style or any other accessory which may change your vehicles ride height. It's a good idea to measure yours. We'll now insert our ball mount into the receiver tube, line up the hitch pin holes and install our hitch pin. more
4/3/2013 2:54:00 PM
Draw-Tite Ball Mount Review - 2010 GMC Sierra- Video
Today, on our 2010 GMC Sierra, well be test fitting the Draw-Tite Ball Mount with rise or 2 drop, rated at 6,000 lbs, part number 2923. Now before beginning our test fit, well need to get our hitch height measurement. To do this, well measure from the inside top edge of the receiver tube to the ground. Now on this truck, that measurement is 17-3/4. Now keep in mind that, that measurement can vary due to hitch style, tire size or any other accessory which may change the vehicles right height, so its a good idea to measure yours. Well now go ahead and insert the ball mount shank into the hitch, line up the hitch pin hole, and install our hitch pin. more
1/10/2013 12:15:40 PM
Draw-Tite Ball Mount Review - 2012 GMC Sierra- Video
12/26/2012 12:51:45 PM
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 GMC Sierra- Video
Today on our 2012 GMC Sierra well be test fitting the Convert-A-Ball Cushioned Ball Mount for 2-inch hitches part number AMSC4. Now before we begin our test fit we will first need to obtain the hitch height for our vehicle. This is the measurement from the ground to the inside top of the receiver tube and ours is about 18 inches. Now to begin our test fit in the draw position well insert the shank of the ball mount into the hitch, line up our hitch pin hole and put our pin through the hitch pin hole and secure it with a clip. Well then measure from the ground to the top of the ball platform and get a measurement of 14 inches. Now for your trailer ride height which is the measurement from the ground to the bottom of the coupler while your trailer is level matches ours this will be an appropriate ball mount for you. more
12/18/2012 11:55:57 AM
Filter Videos
Filter Videos
